5 Key Lessons from Flooding and Storm Clean-up for Skid Steer Attachments
When a natural disaster like a flood or a storm…
Add your details and a short message, and we will respond via email as soon as we can.
Messer Attachments grapple features:
Messer Attachments grapples operate independently, which means they will close until the object(s) are fully cradled within the grapples without the risk of them falling out. The benefit to this is that if you are trying to move uneven objects you can be assured a snug fit of your entire load.
The hooks are made out of 1/2″ Grade 50 plate steel, which is 30% stronger.
They come standard with cylinder guards. (Rod end guards can be purchased separately). Rod End Cylinder Guard
Messer Attachments “T’s” the hoses together under the center step to avoid pinch points.
All the hydraulic hoses have an abrasion resistant sleeve covering them for added protection.
Flat face couplers are included.
Messer Attachments test all hydraulic items at full pressure before sending them out to the customers, as well as ship them with oil so they are ready to go once customer receives them.
All pivot points are greasable.
All use welded cross tube cylinders with 3500PSI (pounds per square inch).
Showing all 18 results
In stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartIn stock
Add to cartManure Fork Grapples
Can be used for manure, fork, logs, brush, rocks, etc.
Messer Attachments uses 39″ overall/ 34″ usable SHW German tines rated for 3000 pounds per tine. Tines are heat treated, made of spring steel will flex much more than the round shafted tines. Removable by taking off the nut at the back of the tine. You can request different length tines however 39″ is the standard.
1/4″ steel formed back with 3″X3″ tubing on top edge of frame.
Great for penetrating pen packs.
Front support plate strengthens the leading edge bucket with a self cleaning design.
Rock Bucket Grapple
Can be used for rocks, brush, scrap, logs, manure, poles, etc.
One piece tooth design: Messer Attachments cut out our teeth in one piece to increase the strength. Some people will cut the back edge and weld it decreasing the strength tremendously.
Teeth are also connected together for added strength.
3″ tooth spacing.
3/8″ Grade 50 steel teeth.
Features removable bolt on sides to allow for extra capacity.
Includes a flat bar on the front & back to allow this attachment to double as a land leveler.
Features a rock dam and tooth notch to keep rocks and other material in the bucket while digging.
High visibility design .
Abrasion resistant (AR400) steel cutting edge.
42″ grapple jaw opening, 42″ deep, and 30″ tall.
Other names grapples can also be referred to are “debris” grapple, “scrap” grapple, “clam” grapple, “utility fork” grapple, “skeleton” grapple, and “industrial” grapple.”
Brush & Root Grapple
Can be used for brush, roots, stumps, rocks, logs, manure, scrap, poles, etc.
One piece tooth design, like our rock bucket grapple, it is to increase strength, if you cut the back edge an weld it you are decreasing the strength tremendously.
Teeth are also connected together for added strength.
6″ teeth spacing.
The design of the front teeth are “jagged” so that you may pull up a root with it.
Does not feature bolt on sides, optional purchase, but do come with holes punched in then in case the customer wants to add them in late. We choose not to include them in this design, because with brush and logs most of the time you will be grabbing objects longer than the bucket itself.
Features a rock dam to keep material in bucket.
High visibility design.
Grapple jaw opening is 42″, 44″ deep, 30″ tall.
Material Bucket Grapple
Can be used for hauling dirt, sand, bedding, feed, silage, manure, brush, logs, rocks, etc.
Features an enclosed top edge, 4 runners underneath, and inside vertical supports for added strength.
1/4″ material used throughout
Removable bolt on sides are included to allow for extra capacity.
Holes are punched on front edge to allow for an optional bolt on cutting edge, we do recommend if wanting to add do it at purchase so that the bucket will be flush to the edge, not worn from use.
31″ tall, 38″ deep, 44″ grapple opening.
Messer Attachments
42739 County Road 184
Sauk Centre, MN 56378
833-352-3477 833-352-3477
Monday - Friday: 7:30 AM - 4:00 PM CST
Saturday & Sunday: Closed
Proudly, Made in the USA
When a natural disaster like a flood or a storm…
Copyright © 2023 Messer Attachments.